TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-II, SECTION-3, SUB SECTION (II)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
NOTIFICATION NO. 44 (RE-2000)/1997-2002
NEW DELHI: 24TH NOVEMBER, 2000
S.O. (E)- In exercise of powers conferred under section 5 of the Foreign Trade (Development and Regulation) Act, 1992 read with paragraph 1.3 and 4.1 of the Export and Import Policy, 1997-2002, the Central Government hereby makes the following amendments in the ITC(HS) Classifications of Export and Import Items, 1997-2002 published on 31st March, 1997 (RE-98) as amended from time to time namely –
2.The following shall be added after paragraph 4 of Chapter 1A: General notes regarding import policy, of ITC(HS) Classifications of Export and Import Items, 1997-2002:
4.All such packaged products, which are subject to provisions of the Standards of Weights and Measures (Packaged Commodities) Rules, 1977 when produced/packed/sold in domestic market, shall be subject to compliance of all the provisions of the said rules, when imported into India. The compliance of these shall be ensured before the import consignment of such commodities is cleared by Customs for home consumption. All prepackaged commodities, imported into India, shall in particular carry the following declarations:
(a) Name and address of the importer;
(b) Generic or common name of the commodity packed;
(c) Net quantity in terms of standard unit of weights and measures. If the net quantity in the imported package is given in any other unit, its equivalent in terms of standard units shall be declared by the importer;
(d) Month and year of packing in which the commodity is manufactured or packed or imported;
(e) Maximum retail sale price at which the commodity in packaged form may be sold to the ultimate consumer. This price shall include all taxes local or otherwise, freight, transport charges, commission payable to dealers and all charges towards advertising, delivery, packing, forwarding and the like as the case may be.
5. A new Appendix V to Schedule 1 of ITC(HS) Classifications of Export and Import Items, 1997-2002, shall annexed as per annexure ‘A’ of this Notification.
6. Import of all the products as per Appendix V to Schedule 1 of the ITC (IIS) Classifications of Export and Import Items 1997-2002, shall be subject to compliance of the mandatory Indian Quality Standards as mentioned in column 2 of the said Annexure, which are also applicable to domestic goods. For compliance of this requirement, all manufacturers/exporters of these products to India, shall be required to register themselves with Bureau of Indian Standards (BIS).”
This issues in Public Interest.
(N.L. LAKHANPAL)
Director General of Foreign Trade and ex-officio
Additional Secretary to the Government of India
Copy to all concerned
(O.P. HISARIA)
Dy. Director General of Foreign Trade
(Issued from File No.01/89/180/00053/AM01/)
ANNEXURE ‘A’ TO NOTIFICATION
NO.44 DATED 24th November, 2000
APPENDIX V
S.No. | Applicable BIS Standards | 1. Name of the products |
---|---|---|
1. | IS 1694 | Tartrazine, Food grade |
2. | IS 1695 | Sunset Yellow FCF, Food grade |
3. | IS 1697 | Erythrosine, Food grade |
4. | IS 1698 | Indigo Carmine, Food grade |
5. | IS 2558 | Ponceau 4R, Food grade |
6. | IS 2923 | Carmoisine, Food grade |
7. | IS 5346 | Synthetic Food Colour preparation and mixtures |
8. | IS 6022 | Fast green FCF, Food grade |
9. | IS 6406 | Brilliant Blue FCF, Food grade |
10. | IS 3827 | Riboflavin |
11. | IS 3841 | B-Carotene |
12. | IS 4446(Pt1) | Chlorophyll, (Mg Complex) |
13. | IS 4446(Pt2) | Chlorophyll, (Cu Complex) |
14. | IS 6386 | Beta-apo-8-Carotenal, Food grade |
15. | IS 6405 | Centhaxanthine, Food grade |
16. | IS 6797 | Methyl ester of beta-apo-8-carotenoic acid, Food grade |
17. | IS 7260 | Ethylester of beta-apo-8-carotenoic acid, Food grade |
18. | IS 2557 | Anmatto colour for food products |
19. | IS 4447 | Sodium benzoate, Food grade |
20. | IS 4448 | Benzoic acid, Food grade |
21. | IS 4467(Pt.1) | Caramel (Plain) |
22. | IS 4467(Pt.2) | Caramel (Ammonia Process) |
23. | IS 4467 (Pt.3) | Caramel (Ammonia sulphite process) |
24. | IS 4750 | Sorbitol, Food grade |
25. | IS 4751 | Potassium meta-bisulphite, Food grade |
26. | IS 4752 | Sodium metabisulphite, Food grade |
27. | IS 4818 | Sorbic acid, Food grade |
28. | IS 5191 | Sodium alginate, Food grade |
29. | IS 5306 | Sodium carboxymethyl cellulose, Food grade |
30. | IS 5342 | Ascorbic acid, Food grade |
31. | IS 5343 | Butylated hydroxy-anixole, Food grade |
32. | IS 5707 | Agar, Food grade |
33. | IS 5719 | Gelatin, Food grade |
34. | IS 6030 | Sodium propionate, Food grade |
35. | IS 6031 | Calcium propionate, Food grade |
36. | IS 6793 | Fumaric acid, Food grade |
37. | IS 7905 | Calcium alginate, Food grade |
38. | IS 7908 | Sulphur dioxide, Food grade |
39. | IS 7928 | Alginic acid, Food grade |
40. | IS 9504 | Tartaric acid, Food grade |
41. | IS 10563 | Mineral Oil, Food grade |
42. | IS 8356 | Titanium dioxide, Food grade |
43. | IS 9971 | DL Lactic Acid, Food grade |
44. | IS 1165 | Milk Powder |
45. | IS 1166 | Condensed milk |
46. | IS 1547 | Infant milk foods |
47. | IS 1656 | Milk-cereal base weaning foods |
48. | IS 11156 | Infant formulae |
49. | IS 269 | 33 Grade Ordinary Portland cement |
50. | IS 455 | Portland Slag cement |
51. | IS 1489(Pt.1 & Pt.2) | Portland pozzolana cement-Part I Flash based and Part 2 Calcined Clay based |
52. | IS 3466 | Masonry cement |
53. | IS 6452 | High alumina cement for structural use |
54. | IS 6909 | Supersulphated cement |
55. | IS 8041 | Rapid hardening Portland cement |
56. | IS 8042 | White Portland Cement |
57. | IS 8043 | Hydrophobic Portland Cement |
58. | IS 8112 | 43 Grade Ordinary Portland cement |
59. | IS 8229 | Oil well cement |
60. | IS 12269 | 53 Grade Ordinary Portland cement |
61. | IS 12330 | Sulphate resisting Portland cement |
62. | IS 12600 | Low heat Portland cement |
63. | IS 1161 | Steel tubes for structural purposes |
64. | IS 1239(Pt.1) | Mild steel tubes, tubular products and other wrought steel fittings: Part I Mild Steel Tubes |
65. | IS 4270 | Steel tubes used for water wells (upto 200 mm dia) |
66. | IS 1342 | Oil pressure stoves |
67. | IS 2787 | Multi-burner oil pressure stoves |
68. | IS 10109 | Oil pressure stove, offset burner type |
69. | IS 418 | Tungsten filament general service electric lamps (upto 100 W) |
70. | IS 302 (Pt.2/Sec 3) | Safety of household and similar electrical appliances-Electric Iron |
71. | IS 302(Pt.2/Sec.30) | Safety of household and similar electrical appliances- Electric radiators |
72. | IS 302 (Pt.2/Sec.201) | Safety of household and similar electrical appliances-Electric immersion water heater |
73. | IS 302 (Pt.2/Sec.202) | Safety of household and similar electrical appliances-Electric stove |
74. | IS 1293 | 3 pin plugs and socket outlets. |
75. | IS 3854 | Switches for domestic and similar purposes |
76. | IS 4949 | 2 Amp Switches for electric and similar purposes |
77. | IS 277 | Galvanized steel wire for telegraph and telephone purposes |
78. | IS 279 | Galvanized steel wire for telegraph and telephone purposes |
79. | IS 280 | Mild steel wire for general engineering purposes |
80. | IS 432(Pt.1) | Mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement |
81. | IS 432(Pt.2) | Cold rolled carbon steel sheets |
82. | IS 513 | Hot rolled steel strips (baling) |
83. | IS 1`029 | Hot rolled steel rivet bars (upto 40 mm diameter) structural purposes |
84. | IS 1079 | Hot rolled carbon steel sheet and strip |
85. | IS 1148 | Hot rolled steel rivet bars (upto 40 mm diameter) structural purposes |
86. | IS 1149 | High tensile stel rivet bars for structural purposes |
87. | IS 1786 | High strength deformed steel bars and wires for concrete reinforcement |
88. | IS 1875 | Carbon steel billets, blooms, slabs and bars for forgings |
89. | IS 1977 | Structural steel (ordinary quality) |
90. | IS 1990 | Steel rivet and stay bars for boilers |
91. | IS 2002 | Steel plates for pressure vessels for intermediate and high temperature service including boilers |
92. | IS 2062 | Weldable structural steel |
93. | IS 2830 | Carbon steel billets, blooms and slab for re-rolling into structural steel (standard quality) |
94. | IS 2831 | Carbon steel billets, blooms and slab for re-rolling into structural steel (ordinary quality) |
95. | IS 2879 | Mild steel for metal are welding electrode core wire |
96. | IS 3502 | Steel chequered plates |
97. | IS 3748 | Tool and die steels |
98. | IS 3930 | Flame and induction hardening steels |
99. | IS 4368 | Alloy steel billets, blooms and slab for forging for general engineering purpose |
100. | IS 4397 | Cold rolled carbon steel strips for ball and roller bearing cages |
101. | IS 4398 | Carbon-chromium steel for the manufacture of balls, rollers and bearing races |
102. | IS 4430 | Mould steels |
103. | IS 4431 | Carbon and carbon-manganese free cutting steel |
104. | IS 4432 | Case hardening steels |
105. | IS 4882 | Low carbon steel wire for rivets for use in bearing industry |
106. | IS 5489 | carbureting steel for use in bearing industry |
107. | IS 5517 | Steels for hardening and tampering |
108. | IS 5518 | Steel for die blocks for drop forging |
109. | IS 5522 | Stainless steel sheets and strips for utensils |
110. | IS 1989 (Pt.1) | Leather safety boots and shoes for miners |
111. | IS 2512 | Miners’ cap lamp batteries (Lead acid type) |
112. | IS 1855 | Standard steel wire ropes for winding and man-riding haulages in mines |
113. | IS 2148 | Flameproof enclosures of electrical apparatus |
114. | IS 2925 | Industrial safety helmets |
115. | IS 3196(Pt.1) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Pt I Cylinders for liquefied petroleum gas (LPG) |
116. | IS 3196(Pt.2) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Pt 2 Cylinders for liquefiable gases other than LPG |
117. | IS 3224 | Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders |
118. | IS 3745 | Yoke type valve connections for small medical gas cylinders |
119. | IS 7142 | Welded low carbon steel gas cylinder for low pressure liquefiable gases not exceeding 5 litre water capacity |
120. | IS 7285 | Seamless steel cylinders for permanent and high pressure liquefiable gases |
121. | IS 7302 | Valve fittings for gas cylinder valves for use with breathing apparatus |
122. | IS 7312 | Welded and seamless steel dissolved acetylene gas cylinders |
123. | IS 7680 | Welded and seamless steel dissolved gas cylinders for ammonia |
124. | IS 7681 | Welded and seamless steel dissolved gas cylinders for chlorine gas |
125. | IS 7682 | Welded and seamless steel dissolved gas cylinders for methyl bromide gas |
126. | IS 8737 | Valve fittings for use with liquefied petroleum gas cylinder of more than 5 litre water capacity: Pt 2 Valve fittings for newly manufactured LPG cylinders |
127. | IS 8776 | Valve fittings for use with liquefied petroleum gas cylinder up to and including 5 litre water capacity |
128. | IS 3470 | Hexane, Food grade |
129. | IS 8144 | Multipurpose dry batteries |
130. | IS 7620(Pt.1) | Diagnostic Medical X-Ray Equipment |
131. | IS 14625 | Plastic Feeding Bottles |